Project Caretaker - remote controlled robot https://shaarli.igox.org/shaare/K1PvDw #robotics #robot #diy
Learning how to use polymer clay and 3D printed rollers to make walls!
Rollers used are from here, free from the author and print great on resin: https://www.myminifactory.com/users/randommakingencounters?show=store
Day 26: Swapped out the rear main seal. The old one didn't look terrible, but it's one of those jobs that'll take 15 minutes now, but many horrible hours if I have to do it later when everything's back together, so I might as well.
Puttered around on a few other little odds and ends, but I'm now really at a stop until I get the new flywheel bolts so I can reinstall it for real. Definitely looking like that'll be after my surgery. #WeirdCarMastodon #DIY #BMW #E39 #M54B30 #WrenchEveryDay
Northern spy 
planted in place of the aged hydrangea. We will train it tall so that it can provide shade over the path and maybe front yard/pond on hot summer days.
Parents had a whole bunch of horse manure 
and a big bag of peat moss so we mixed some of that in for the tree. It didn’t have much of a root ball so we’ll have to make sure it stays nice and anchored. #diy #gardening #apple #pnw #portalberni #vancouverisland
Stoffvorrat erfolgreich dezimiert, Kleiderschrank erfolgreich aufgefüllt. Gerade richtig für die Übergangszeit, wenn Hoodies zu warm und T-shirts zu kalt sind. #nähenmachtglücklich #nähen #diy
Reduced my, fabric stash, filled my wardrobe. Prefect for when hoodies are too warm and tshirts are too cold. #sewing
#ShortBreak #shorts #diy #gyo #growYourOwn #garden #gardening #Weedy #TheWeedyGarden #sustainability #selfsufficience #selfsufficient #communitysufficience #communitysufficient #community
Awwww, lovely ^.^ 
(Well, Weedy, actually you wouldn't need ANY money at all. Just organize a community based on mutual help. There is no need for money. We will get there, don't worry ^.^)
CW cuir / pas pour les vegan
Je me suis fait un étui en cuir pour mon nouveau téléphone sur la même illustration que j'avais utilisé pour la coque en bois.
(l'artiste est au courant et j'ai fait des achats sur son store pour le rémunérer pour mon usage perso de son illustration)
@ben would be nice o have that one back, when it was painted over with a football club a bunch of people got up in the middle of the night and painted over that with a anti-war message. https://www.youtube.com/watch?v=Da3xopZXCPM maybe it's time for a bunch of people to put the original message back #DIY
This weeks stupidity… I made a mini 5u HomeLab for my HomeAssistant and PiHole boxes that sit inside an Ikea storage crate.
Includes a Pi5 16GB, Pi 3b+, Pi Zero W2 and a Pimoroni Badger for stats.
#ikea #ikeahack #homelab #minilab #homeassistant #pihole #network #3dprinting #3dprinted #raspberrypi #pimoroni #diy #maker @geerlingguy
The
The PICList is a collection of people interested in the Microchip PIC and other similar processors who have requested that email sent to the PICList email address be forwarded to them. From the mass m
https://www.dapj.net/the-piclist-microchip-pic-interest-group/
#embeddedsystems #electronics #diy #hobby
bonus content for @arbutus ! Arbutus is thriving! Trimmed some dead wood and lower branches. #OperationMoveDirtMountain #poolpond #diy #portalberni #backyard #spring
Highlight of the day: listening to and watching an eagle-couple chatter and soar above the house! 
#OperationMoveDirtMountain #poolpond #diy #portalberni #backyard #spring
The day is done. Made a reasonable dent in the mountain. Raised the level of about half of the driveway. Tomorrow I will measure the fabric for the car tracks and put down another 2 loads of dirt to bring it to the edge of the tracks.
Then we'll need to wait until a weekday when I am home to go get sand, gravel, and top soil.
Maybe Ill go to the stone shop next week and grab the flagstones for the path. 
Lots to do!
Then we will move to the backyard again and start on plumbing for the poolpond!
When we bought this house we bought also a very big greenhouse that I'm slowly starting to use.
But now I have to learn how to take it apart, because ants found their way into one of the polycarbonate panels (they all have some trapped insect or dirt - mostly pollen I guess).
I have to probably remove the roof ridge and slide it out from the top.
And now for something completely different. I took a workshop at The Society for Contemporary Craft with Glen Gardner and Maria Camera-Smith today. The copper one was practice for the sterling silver one. The facility and instructors were top notch. And I think they turned out pretty nice. Thanks. #maker #pghmaker #diy #jewellery #cuff #copper #silver #silversmith #coppersmith #forging
